Posts

Showing posts with the label extended temperature

Renice Industrial USB DOM SSD, -40 – 85ºC, Write Protection

Renice EUSB is based on NAND Flash storage media, supports USB Specification, Revision 2.0 and backwards compatible with Revision 1.0. With Write Protect function, PC boot-up from EUSB Mass Storage Drive, Password protection, and Secured Partitioning functions, coupled with ECC and wear leveling. The USB system interface is widely available in many system designs and easy to implement. Renice EUSB has highly advanced flash management algorithm to guarantee higher performance and data integrity. It is ideal storage solution for PC caching and boot drives for embedded, computing, server and networking systems. ● HOST Interface: USB2.0 (Backward compatible with USB1.1) ● Form factor: 36.9mmX26.6mmX9.6mm) L×W×H ● Connector: 9-pin USB connector ● Performance: -Max Sequential Data Read/Write: 32/25MB/s   Access Time: <0.1ms ● Capacities: 8GB~128GB (MLC);           4GB~32GB (SLC) ● Power Management: – Input voltage: 5V (±5%) ● Temperature ra...

Renice SSD Temperature Test Procedures - Extreme Temperature Tolerance (-50°C to +90°C)

Image
Temperature test of SSD products includes temp cycling test and temp shock test. Note: “Plenty of frost turns to be water drops in the transition process from low temp to high temp, water drops may easily inflict short circuit on chip pins and thus burn the SSD, therefore, reinforcement and waterproof treatment have to be done to a reliable SSD!!!” A true picture of a tested circuit board with frosting surface under -40°C: Temperature Cycling Test Temp cycling first sets the temperature at -50°C and keep it for 4 hours, then increase the temperature to +90°C and keep it for 4 hours, and after this, lower the temperature to -50°C to finish one cycle and start another cycle, multiple cycles one by one. Industrial grade operation temperature standard is -40°C to +85°C, because temperature deviation is common in temperature cabinets, in order to avoid different test results in client-side causing by the deviation, Renice in-house tests extend the temperature testing range to -50°...

2.5" SATAII/SATAIII SSD, Extended temperature

https://drive.google.com/file/d/0B2ENB7KLrYWBRTR2NDJhZG5aYkE/view