Renice Industrial USB DOM SSD, -40 – 85ºC, Write Protection


Renice EUSB is based on NAND Flash storage media, supports USB Specification, Revision 2.0 and backwards compatible with Revision 1.0. With Write Protect function, PC boot-up from EUSB Mass Storage Drive, Password protection, and Secured Partitioning functions, coupled with ECC and wear leveling. The USB system interface is widely available in many system designs and easy to implement.

Renice EUSB has highly advanced flash management algorithm to guarantee higher performance and data integrity. It is ideal storage solution for PC caching and boot drives for embedded, computing, server and networking systems.

● HOST Interface: USB2.0 (Backward compatible with USB1.1)

● Form factor: 36.9mmX26.6mmX9.6mm) L×W×H

● Connector: 9-pin USB connector

● Performance: -Max Sequential Data Read/Write: 32/25MB/s
  Access Time: <0.1ms

● Capacities: 8GB~128GB (MLC);
          4GB~32GB (SLC)

● Power Management:
– Input voltage: 5V (±5%)

● Temperature ranges:
– Operation: -40 to 85°C (Industrial)
– Storage: -50 to 95°C

● Intelligent features:
– Completes USB specification ver.2.0 compatibility
– Complies with USB Mass Storage Class specification ver.1.0
– Bulk Only Transport protocol
– Complies with USB power specifications for bus-powered devices
– ISP (In System Programming) firmware updates capability
– Flexible 96-bit/ 1KB BCH ECC engine
– Supports VID, PID, serial number & vender information update
– Provides LED indicates when USB Disk is in Ready/ Working mode
– Support “Write Protect” security function to protect data in UFD
– Flash memory power down logic and flash memory write protect control
– CRC for additional reliability

● Data retention: 10 years @25C
  Read endurance: Unlimited

●Power Consumption (typical)
Operation (Read/Write) – 0.6W/ 0.8W
Idle – 0.3W

●Operation Temperature Industrial: -40~+85°C
 Humidity: 5-95%
 Vibration: 20G (7-2000Hz)
 Shock: 2,000G (@0.3ms half sine wave)

(datasheet please email: may@renice-tech.com)

Comments

Post a Comment

Popular posts from this blog

About SSD AES-encryption

Self-encrypting drives use an encryption engine built into the SSD’s controller to encrypt every file stored on the drive. The purpose of AES Encryption is to convert standard input data known as plaintext to an unintelligible output known as cipher text. So if AES encryption on SSD used for data randomization function only, it only provides some data protection in the sense that if the controller is damaged, a 3rd party would not be able to read the data on the flash. In normal usage, however, there would be no data protection as any party that is in possession of the drive can read the data. Methods of using AES on SSD to Secure Data Hardware-based Encryption Self-encrypting drives include dedicated AES encryption engines that do not require software to run on the host. The randomized AES encryption keys are generated at product initialization using the controller’s true random number generator and encrypted in the SSD. This could also be implemented by a Trusted Platform Modu...
Read more

Renice r-Backup® Power Failure Protection of SSD

Image
rBackup (Rapid Backup) refers to a technique of how to flush data stored in DDR into NAND Flash within a very short period. It is developed by Renice to solve the problem that regular power failure protecting mechanism (based on super capacitor or tantalum capacitor) does not work when capacitor ages with power less than initial design as time goes by. Background Mainstream SSD deploy SDRAM or DDR to improve the R/W speed. That follows the issue of data loss or mapping table loss when sudden power failure occurs. To guarantee the data integrity, usually SSD makers design a power failure protecting mechanism based on Super-Capacitor or Tantalum Capacitor, which will work as backup power for SSD in power failure circumstance. This design seems to be perfect to balance the performance and reliability. However there is a potential hazard behind it in real application. Both Super-Capacitor and Tantalum Capacitor keep aging as charge & discharge times increase. Common warranty pe...
Read more

Почему SSD не удалось после аномального отключения питания?

Image
Учитывая, что SSD должен основываться на FTL для реализации передачи данных между логическим адресом и физическим адресом, если при нормальной работе (чтение / программа / стирание) происходит ненормальное отключение питания, это может привести к потере таблицы отображения, которая имеет не завершено обновление и в результате SSD не удалось обнаружить хостом. Между тем, чтобы улучшить производительность чтения / записи, SDRAM обычно принимается в качестве буфера на плате SSD. Аномальное отключение питания также может привести к потере данных или обновленной таблице сопоставления, которые не были записаны в NAND Flash из SDRAM. Проблема сбоя, вызванная аномальным отключением питания 1. SSD не может быть обнаружен ОС после внезапного отключения питания, он может быть повторно использован после повторной сборки таблицы сопоставления или замены. 2. Массовый новый плохой блок, созданный после неоднократного аномального отключения питания. Механизм создания нового плохого блока: ког...
Read more